By installing one of our high quality Deluxe Misting Kits in your greenhouse or polythene tunnel you will by able to easily and efficiently create a fine, even mist of water, ideal when propagating seedlings and cuttings.
Widely and successfully used by commercial growers.
Each kit is supplied complete with the following:
Brass mist jet(s) - fully adjustable, these precision made jet(s) will provide a very fine, even mist. For efficient, long term use each jet has an in-built filter for easy cleaning.
PVC Riser(s) - these lift the mist jet(s) approximately 20" (50cm) above the surface of the bench, enabling the mist to fall 'over' the plants.
PVC Horizontal Tube(s) - each approximately 20" (50cm) in length, they are used to space the risers and rest on the surface of your bench.
Threaded Connectors - supplied with all the necessary robust connectors to join horizontal tubes to rises and to fit mist jet(s) and hose inlet.
PTFE tape - by fitting a small amount of tape around each joint makes assembly easier and ensures a watertight join.
Hose Inlet - enables a secure, watertight connection between your hose and the misting kit.
Available in three sizes, the following number of mist jets are included with each kit: one jet with a 4' x 4' (1.2m x 1.2m) Kit, two jets with a 7' x 4' (2.1m x 1.2m) Kit and three jets with a 10' x 4' (3m x 1.2m) Kit.
Please note: the Deluxe Misting Kit can ONLY be run off mains water or a good pumped supply.
Illustration shows 4' x 4' Deluxe Misting Kit.
Please Note:
A minimum water pressure of 25psi (1psi = 2.2ft. head of water) is needed to operate any mist system. The higher the pressure the finer the mist. Therefore these Deluxe Misting Kits can only be run off mains or a good pumped supply. |
